93
1. Oil filler bolt (MX'er 150/125)
1. Oil filler bolt (MX'er 50)
E. Fill the engine with oil and install the oil filler
bolt.
Recommended oil : See page 125
Oil quantity :
Periodic oil change
0.2 L (MX'er 150/125)
0.09L (MX'er 50)
Be sure no foreign material enters the
crankcase.
CAUTION:
Tightening torque
Oil filler bolt:
MX'er 150/125: 23 Nm (2.3 m-kg, 17 ft-lb)
MX'er 50: 15 Nm (1.5 m-kg, 11ft-lb)
F. Start the engine and warm up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately and check for the cause.
G. Check the oil level.
To Next Page
Loading...
