Chain
Check the general condition of the chain and
check the chain slack before every ride.
Lubricate and adjust the chain as necessary.
(See pages 108~110 for details.)
Lights
Check the headlight, signal light, taillight and
hazard light to make sure they are in working
condition. Repair as necessary for proper
operation.
Switches
Check the operation of the headlight switch and
any other switches.
Repair as necessary for proper operation.
Battery
Check fluid lever and fill if necessary. Use only
distilled water if refilling is necessary.
(See pages 114~116.)
Throttle lever
Check to see that the throttle lever operates
correctly. It must open smoothly and spring back
to idle position when released. Repair as
necessary for proper operation.
Fittings and fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine to
a KYMCO dealer or refer to the Service Manual
for correct tightening torque.
40
To Next Page
Loading...
