47
1. Set the parking brake.
2. Turn the fuel lock to "ON".
3. Turn the main switch to " " .．
4. Turn the engine stop switch to " ".
WARNING
POTENTIAL HAZARD
Freezing control cables in cold weather.
WHAT CAN HAPPEN
You could be unable to control the ATV,
which could lead to an accident or collision.
HOW TO AVOID THE HAZARD
When riding in cold weather, always make
sure all control cables work smoothly
before you begin riding.
Starting a cold engine (only MX'er 50)
Use the electric starter button
．
．
．
．
．
Push the electric starter button without
pushing the throttle lever.
If the engine fails to start after the electric
starter button is pressed for 3~4 seconds,
push the throttle lever slightly to facilitate
starting.
When the ATV is not used for a long time or
the fuel tank is empty, if the engine es still
hard to start after the fuel tank is refilled
with gasoline, slightly push lever and press
the electric starter button for several times
to start the engine.
In order to avoid battery overcharge, do not
press the starter button more than 5
seconds.
If the engine does not start after the electric
starter button is pressed for 5 seconds,
wait for more than 5 seconds and then
press the button again or start the engine
by the kick lever.
To Next Page
Loading...
