KYMCO MX'er 150 - Drive Select Lever Operation and Reverse Driving (Only MXer 150;125)

Drive select lever operation and reverse
driving (only MX'er 150/125)
Before shifting, you must stop the machine
and return the throttle lever to its closed
position. Otherwise, the transmission may
be damaged.
A. Bring the machine to a complete stop and
return the throttle lever to the closed
position.
C. Shift the gear from neutral to forward by
moving the shift lever along the shift guide.
D. Open the throttle lever gradually.
B. Apply the parking brake.
A. Bring the machine to a complete stop and
return the throttle lever to the closed
position.
B. Apply the parking brake.
C. Shift the gear from neutral to reverse and
by moving the shift lever along the shift
guide.
1.Shifting : forward
2.Shifting : reverse
Make sure that the lever is completely shifted
into position.
49
CAUTION:
NOTE:
A. Drive select lever
2. Forward
1. Neutral "N"
3. Reverse "R"
If the drive select lever is shifted into forward
while the engine is running, the engine will
stop unless the parking brake is applied.
NOTE: