48
Start with the kick lever
1. Place the ATV on level ground.
2. Depress the kick lever with force.
When the engine is cold and does not start
after the kick lever is cold and does not
startaferthekickleverisdepressedfor
3~4 times, push the throttle lever slightly to
facilitate starting.
Warm up the engine is started, do not
accelerate suddenly and keep riding at low
speed to prolong the engine service life.
After the engine is started, the kick lever
must be returned to its original position.
．
．
．
(only MX'er 50)
1. Starter kick lever (only MX'er 50)
To Next Page
Loading...
