POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Increases the possibillty of an accident or
equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use
it to make sure the ATV is in safe operating
condition.
Always follow the inspection and
maintenance procedures and schedules
described in the Owner's Manual.
Brake levers and pedal
Check for correct free play in the brake levers.
If the free play is incorrect, adjust it. (See
pages 102~107.)
Check operation of the levers and the pedal.
They should move smoothly and there should
be a firm feeling when the brake is applied. If
not, have the machine inspected by a KYMCO
dealer.
Brake operation
Test the brakes at slow speed after starting
out to make sure they are working properly. If
the brakes do not provide proper braking
performance, inspect the brakes for wear.
(See page 101.)
Front, rear brakes and brake pedal
36
WARNING
1.
2.
To Next Page
Loading...
