POTENTIAL HAZARD
Using low flash point solvents or gasoline
to clean the air filter element.
WHAT CAN HAPPEN
Low flash point solvents or gasoline can
catch fire or explode.
HOW TO AVOID THE HAZARD
Use parts cleaning solvent to clean the air
filter element.
F. Squeeze the excess solvent out of the
filter and let it dry.
Do not twist the filter element when
squeezing it.
G. Inspect the element. If damaged,
replace it.
H. Apply KYMCO foam air filter oil or other
quality foam air filter oil to the element. If
foam air filter oil is not available, motor
oil may be used.
I. Reinstall the element to the element
guide.
J. Reinstall the element assembly and
parts removed for access.
The element should be wet but not dripping.
97
WARNING
CAUTION:
NOTE:
To Next Page
Loading...
