The engine can be started only when the
drive select lever is in neutral.
When the select lever is in neutral, the
neutral indicator light should come on. If the
light does not come on, ask a KYMCO dealer
to inspect it.
6. Use the starter (choke) in reference to the
figure:
Position :Cold engine start-ambient
temperature below 5 C (40 F).
Position :Cold engine start-ambient
temperature at 0 C
(30 F)~30 C(90 F) and warming up
position.
Position :Cold engine start-ambient
temperature above 25 C(80 F) and
warm engine start position.
00
0
000
00
6. Completely close the throttle lever and start
the engine by pushing the start switch.
45
NOTE:
1. Fully open
3. Closed
2. Half open
a. Starter (choke)
To Next Page
Loading...
