KYMCO MXU 300 - FRONT HYDRAULIC BRAKE

13. BRAKE SYSTEM
13-3
MXU 300/250
FRONT HYDRAULIC BRAKE
BRAKE PADS REMOVAL
Remove the front wheel. (
page
14-3)
Remove the two brake pad pins from the
brake caliper.
Remove the two bolts attaching the brake
caliper and then remove brake caliper.
Compress the brake caliper holder and
remove brake pads.
A wear indicator is provided on each brake.
The indicators allows checking of brake
pads wear. Check the position of the
indicator.
Brake Pad Pins
Bolts
Brake Pads
Brake Caliper Holde
r