KYMCO MXU 300 - HORN (ON ROAD)

19. LIGHTS/SWITCHES
19-4
MXU 300/250
REAR
Remove the bulb socket by turning it
counterclockwise.
Remove the bulb.
Install the bulb in the reverse order of
removal.
LICENCE LIGHT BULB (ON ROAD)
Remove the two screws and licence light
cover.
Remove the bulb.
Install the bulb in the reverse order of
removal
HORN (ON ROAD)
REMOVAL
Disconnect the horn wire leads.
Remove the bolt and remove horn.
INSTALLATION
The installation sequence is the reverse of
removal.
Bulb Socket
Bulb
Horn
Bolt
Horn Wire Leads