KYMCO MXU 300 - ENGINE INSTALLATION (MXU 250)

6. ENGINE REMOVAL/INSTALLATION
6-7
MXU 300/250
ENGINE INSTALLATION (MXU
250)
Installation is in the reverse order of
removal.
The rear upper and lower engine mounting
bolts and nuts loosely install, then tighten
the engine mounting nuts to the specified
torque.
Torque: 40 N-m (4 kgf-m, 29 lbf-ft)
The brackets, bolts, front engine mounting
bolt and loosely install, then tighten the
bolts on the brackets to the specified torque.
Torque: 22 N-m (2.2 kgf-m, 16 lbf-ft)
Tighten the front engine mounting bolt and
nut to the specified torque.
Torque: 40 N-m (4 kgf-m, 29 lbf-ft)