12. COOLING SYSTEM
12-7
MXU 300/250
COOLANT REPLACEMENT
PREPARATION
● The effectiveness of coolant decreases
with the accumulation of rust or if there is
a change in the mixing proportion during
usage. Therefore, for best performance
change the coolant regularly as specified in
the maintenance schedule.
● Mix only distilled, low mineral water with
the antifreeze.
Mix only distilled, low mineral water with
the antifreeze.
Recommended mixture:
1:1 (Distilled water and antifreeze)
REPLACEMENT/AIR BLEEDING
Remove the radiator cap.
Remove the drain bolt and drain the coolant
from the system.
Radiator Cap
Coolant Drain Bol
When filling the system or reserve tank
with coolant (checking the coolant
level), place the vehicle in a vertical
position on a flat, level surface.
＊
To Next Page
Loading...
