KYMCO MXU 300 - Page 58

3. INSPECTION/ADJUSTMENT
3-11
MXU 300/250
ENGINE OIL REPLACEMENT
Place the machine on a level place.
Warm up the engine for several minutes and
stop it.
Place a container under the engine.
Remove the oil fill cap and drain plug to
drain the oil.
Reinstall the drain plug and tighten the
drain plug to specification.
Torque: 2.5 kgf-m (25 Nm, 18 lbf-ft)
Fill the engine with oil and install the oil fill
cap.
Oil Capacity:
At disassembly:
1.6 liter (1.4 lmp qt, 1.7 Us qt)
At change:
1.4 liter (1.23 lmp qt, 1.48 Us qt)
ENGINE OIL REPLACEMENT AND
OIL FILTER CLEANING
Place the machine on a level place.
Warm up the engine for several minutes and
stop it.
Place a container under the engine.
Remove the oil fill cap and oil filter cap to
drain the oil.
Oil Fill Cap
Drain Plu
g
Oil Filter Ca
p
The engine oil will drain more easily
while the engine is warm.
＊