Kyocera Ecosys FS-1320D Technical Reference Manual

Chapter 7 Emulation
7-42
Switching the Print Resolution
Because the printing systems with the 1200 dpi resolution support print at 300, 600, 1200
dpi, the printing system provides an FRPO command to establish a default at either level
of resolution.
For fine 1200 dpi resolution, command:
!R! FRPO N8, 3; EXIT;
For 600 dpi resolution, command:
!R! FRPO N8, 1; EXIT;
For 300 dpi resolution, command:
!R! FRPO N8, 0; EXIT;
When the printing resolution is changed between 1200 dpi, 600 dpi, and 300 dpi, the
printing system loads the PJL current environment values.
In addition to the FRPO N8 command as explained above, printing systems that permit
the resolution to be set at either 300, 600, or 1200 are provided with the RESL (change
RESoLution) command which switches the resolution on the fly. For details about this
command, refer to PRESCRIBE Commands Command Reference.
Note
The amount of available printing system memory will determine whether the 600/1200 dpi
default can be effective. If factors such as resource protection, duplexing, and raster mem-
ory reduce memory too low, then the printing system will remain at 300 dpi resolution.
HPLJ 4, duplex mode=on, raster memory=Legal 3 Mbytes 11 Mbytes
HPLJ 4/KPDL, duplex mode=None, raster memory=A4/Letter 2 Mbytes 6 Mbytes
HPLJ 4/KPDL, duplex mode=None, raster memory=Legal 2 Mbytes 7 Mbytes
HPLJ 4/KPDL, duplex mode=on, raster memory=A4/Letter 3 Mbytes 10 Mbytes
HPLJ 4/KPDL, duplex mode=on, raster memory=Legal 3 Mbytes 11 Mbytes
HPLJ 4/KPDL, resource protection, duplex mode=None 10 Mbytes 10 Mbytes
HPLJ 4/KPDL, resource protection, duplex mode=on 14 Mbytes 14 Mbytes
Table 7.21. Example: FS-9500DN
Printing Condition Resolution
300 dpi 600 dpi 1200 dpi
Fast mode Fine mode
PCL 6, duplex mode=None 8 MB 8 MB 8 MB 8 MB
PCL 6, duplex mode=On 8 MB 8 MB 8 MB 12 MB
KPDL, duplex mode=None 8 MB 8 MB 8 MB 8 MB
KPDL, duplex mode=On 8 MB 8 MB 12 MB 12 MB
PCL 6/KPDL resource protection,
duplex mode=None
— 10 MB 10 MB 10 MB
PCL 6/KPDL, resource protection,
duplex mode=On
— 14 MB 14 MB 14 MB
Table 7.20. Example: FS-1000 Series
Printing Condition Resolution
300 dpi 600 dpi

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm