Kyocera Ecosys FS-1320D Technical Reference Manual

Chapter 7 Emulation
7-44
PJL command syntax
A PJL command line containing the ENTER command appears as follows:
PJL syntax also uses the following control codes and special identifiers.
Environment
Commands
DEFAULT Sets default for environment variables.
SET Sets an environment variable to a specified value during a PJL
job.
INITIALIZE Resets current and default PJL variables to factory default.
RESET Defaults current PJL variables.
Status Readback
Commands
INQUIRE Requires the current value for a specified environment
variable.
DINQUIRE Requires the default value for a specified environment
variable.
ECHO Returns the <words> portion of the command to the host
computer.
INFO Requests a specified category of printing system information,
such as printing system model, available printing system
memory, configuration, status, environment variables, and
unsolicited status variables.
USTATUS Allows printing system to send unsolicited status messages for
device status changes, end-of-job status, and the number of
pages printed. Status can be sent at specified time intervals.
USTATUSOFF Deactivates all unsolicited status.
Device Attendance
Commands
RDYMSG Specifies a message that replaces the Processing message on
the message display. Shown in offline state if the printing
system is processing data (except in mode selection).
OPMSG Displays specified message on the message display and sets
printing system offline.
STMSG Displays specified message on the message display and sets
printing system offline. If status readback is on, returns name
of the key that is used to return the printing system online.
PJL File System
Commands
FSDELETE Deletes printing system mass storage files.
FSDOWNLOAD Downloads files to the printing system mass storage system.
FSINIT Initializes the printing system mass storage file system.
FSMKDIR Creates a directory on the printing system mass storage file
system.
<HT> Horizontal tab character (ASCII 9)
<LF> Line feed character (ASCII 10)
<CR> Carriage return character (ASCII 13)
<SP> Space character (ASCII 32)
<ESC> Escape character (ASCII 27)
<FF> Form feed character (ASCII 12)
<WS> White space, a result of one of more <SP> or <HT>.
Table 7.23. Supported PJL Commands
Command Group Command Description
@PJL ENTER LANGUAGE = personality [<CR>]<LF>
PJL prefix Option name Option value Required line feed
Enter this portion verbatim Optional carriage return

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm