4-51
Operation Panel
Print Resolution (Selecting the Print Resolution)
You can set the default print resolution in four ways: 300dpi, 600dpi, Fast1200 and Fine1200. The clarity of printed
characters and graphics becomes sharper in this order.
1
In the Print Quality menu, press or to select Print
Resolution.
2
Press [OK]. The Print Resolution screen appears.
3
Press or to select the Print Resolution.
4
Press [OK]. The Print Resolution is set and the Print Quality
menu screen reappears.
Print Density (Selecting the Print Density)
The print density can be adjusted in five steps: from 1 Lighter to 5 Darker. The default setting is 3.
1
In the Print Quality menu, press or to select Print
Density.
2
Press [OK]. The Print Density screen appears.
3
Press or to select the print density from five steps from 1
Lighter to 5 Darker
4
Press [OK]. The print density is set and the Print Quality menu
screen reappears.
To Next Page
Loading...
Need help?
General