A-9
Appendix
General Description of Options
SD/SDHC Memory Card
The printer is equipped with a slot for an SDHC memory card with a maximum size of 32 GB, and an SD memory card with
a maximum size of 2 GB. An SD/SDHC memory card is useful for storing fonts, macros, and overlays.
This enables high-speed printing of multiple copies using an electric sort function. Also, you can use the Job Box functions.
For details, refer to Job Box on page 5-21.
Reading the SD/SDHC Memory Card
Once inserted in the printer’s slot, the contents of the SD/SDHC memory card can be read from the operation panel or
automatically when you power on or reset the printer.
Installing and Formatting the SD/SDHC Memory Card
To use an unused SD/SDHC memory card, you must first use the printer to format the SD/SDHC memory card.
1
Switch off the printer, remove the power cord and then remove the
main controller unit. To read how to remove the main controller unit,
refer to the section on inserting the memory module.
2
Insert the SD/SDHC memory card into the SD/SDHC memory card
slot.
3
Attach the main controller unit to the printer in the reverse procedure
to when it was removed.
4
Format the SD/SDHC memory card from the operation panel. For the
procedure for formatting, refer to Format SD Card (Formatting the SD
card) on page 4-84.
PF-4100 Paper Feeder
The optional paper feeder PF-4100 will each hold approximately
500 sheets of paper. Up to 4 optional feeders can be added to the bottom
of the printer, allowing continuous feeding of up to 2,500 sheets of paper
when combined with the printer's own cassette.
IMPORTANT When you use the paper feeder, place the papers print-
side down.
For details of the supported paper sizes, refer to Selecting the Right
Paper on page A-18. For the paper type setting, refer to Media Type
(Setting the cassette paper type) on page 4-36.
To Next Page
Loading...
Need help?
General