Operation Panel
4-52
Page Setting (Setting pagination)
You can use the Page Setting menu to set the number of copies, the page orientation and other pagination settings.
The options available in Page Setting are as follows:
• Copies (Number of copies)...4-52
• Reduced Print (Reduced print settings)...4-52
• Orientation (Print orientation)...4-54
• LF Action (Linefeed)...4-54
• CR Action (Carriage-Return)...4-55
• Wide A4 (Wide A4 pitch)...4-55
• XPS FitTo Page (Adjusting the XPS file print out size)...4-55
• TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)...4-55
1
In the Print Settings menu, press or to select Page
Setting.
2
Press [OK]. The Page Setting menu screen appears.
Copies (Number of copies)
You can set the number of copies of each page to be printed.
1
In the Page Setting menu, press or to select Copies.
2
Press [OK]. The Copies screen appears.
3
Use the numeric keys or press or to set the number of copies.
4
Press [OK]. The setting is stored and the Page Setting menu
reappears.
Reduced Print (Reduced print settings)
This selects the settings for reducing the size of the print data and printing it (Reduced Print). Set the paper size before the
reduction and set the reduction ratio.
1
In the Page Setting menu, press or to select Reduced
Print.
Note
With Reduced Print, the results may differ from the results of same size printing. The character line width
may not be constant and lines may appear in the middle of figures, images or patterns. Also, thin lines, etc., may
not be printed. Furthermore, it may not be possible to read barcodes that have been printed with Reduced Print.
To Next Page
Loading...
Need help?
General