Kyocera ECOSYS FS-2100D User Manual

Operation Panel
4-88
6 Press [OK]. The Login Password entry screen is displayed.
7 Enter the Login Password using the numeric keys then press [OK].
The login screen reappears.
8 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Timer Setting menu appears
showing a list of available options.
Auto Panel Reset (Auto panel reset setting)
The Auto Panel Reset function automatically restores the default settings if the panel is not used for a set time. The default
setting is On.
For setting the time until the panel is automatically reset, refer to PanelReset Timer (Setting the panel reset timer) on page
4-88.
1 In the Timer Setting menu, press  or  to select Auto Panel
Reset.
2 Press [OK]. The Auto Panel Reset screen appears.
3 Press  or  to select whether Auto Panel Reset is enabled.
4 Press [OK]. The Auto Panel Reset setting is set and the Timer
Setting menu reappears.
PanelReset Timer (Setting the panel reset timer)
When Auto Panel Reset is set to On, this sets the time until the panel is automatically reset after the user stops using
the panel. The default setting is 90 seconds.
1 In the Timer Setting menu, press  or  to select PanelReset
Timer.
2 Press [OK]. The PanelReset Timer screen appears.
3 Use the numeric keys or press  or  to set the panel reset time.
4 Press [OK]. The panel reset time setting is stored and the Timer
Setting menu reappears.
Login Password:
Text
ABC
Login User Name:
Login
Login Password:
4000
Note The initial setting for the administrator's Login
Password is "4000".
For details on entering characters, refer to Character Entry
Method on page A-2.
Timer Setting:
Sleep Level Set.
Exit
03
PanelReset Timer
02
01
Auto Panel Reset
Auto Panel Reset:
Off
01
On
02
*
PanelReset Timer:
(5 - 495)
sec.90

Kyocera ECOSYS FS-2100D Specifications

General

Brand	Kyocera
Model	ECOSYS FS-2100D
Category	Printer
Language	English