Kyocera ECOSYS FS-2100D User Manual

4-115
Operation Panel
2 Press [OK]. The NW User Property menu screen appears.
The options available in NW User Property are as follows:
• Off/On (Switching network user property acquisition On/Off)...4-
115
• Authenticat Type (Authenticat type setting)...4-115
Off/On (Switching network user property acquisition On/Off)
Set the NW User Property to On/Off.
1 In the NW User Property menu, press  or  to select Off/On.
2 Press [OK]. The Off/On screen appears.
3 Press  or  to select On or Off.
4 Press [OK]. The NW User Property menu reappears.
Authenticat Type (Authenticat type setting)
Set the authentication method.
1 In the NW User Property menu, press  or  to select
Authenticat Type.
2 Press [OK]. The Authenticat Type screen appears.
3 Press  or  to select Simple or SASL.
4 Press [OK]. The NW User Property menu reappears.
PIN Login
This sets whether or not to login using PIN. When set to On, you can login by entering PIN on the login screen.
1 In the User Login Set. menu, press  or  to select PIN Login.
2 Press [OK]. The PIN Login screen appears.
3 Press  or  to select On or Off.
4 Press [OK]. The User Login Set. menu reappears.
NW User Property:
Off/On
Exit
Authenticat Type
01
02
Note Authenticat Type is only displayed when
Kerberos has been set as the Server Type (Server type
selection) on page 4-113.
Off/On:
Off
01
On
02
*
Authenticat Type:
Simple
01
SASL
02
*
Note This setting is only displayed when Netwk Authentic. has been set as the Login Type (Enabling of User
Login Administration) on page 4-112 and This setting is only displayed when Ext. has been set as the Server Type
(Server type selection) on page 4-113.
Pin Login:
Off
01
On
02
*

Kyocera ECOSYS FS-2100D Specifications

General

Brand	Kyocera
Model	ECOSYS FS-2100D
Category	Printer
Language	English