Operation Panel
4-120
2
Press [OK]. The Key Login screen appears.
3
Press or to select Permit or Prohibit.
4
Press [OK]. The ID Card Settings menu reappears.
Additional Auth. (Setting for additional authentication)
This sets whether or not to require the entry of a Login Password or PIN (Personal Identification Number) after
authentication using an ID card. When set to On, the Login Password or PIN entry screen is displayed after the ID card is
authenticated.
1
In the ID Card Settings menu, press or to select
Additional Auth..
2
Press [OK]. The Additional Auth. screen appears.
3
Press or to select Off, Use Password or Use PIN.
4
Press [OK]. The ID Card Settings menu reappears.
Note
This setting is only displayed when Ext. has been set as the Server Type (Server type selection) on page 4-
113.
When Use PIN is selected in this setting, even if the PIN Login is set to Off, you can enter PIN for additional
authentication.
To Next Page
Loading...
Need help?
General