Preparation before Use
2-8
2
Click View License Agreement and read the License Agreement.
Click Accept.
3
Select Express Install tab.
4
Select the device to be installed.
You can also select Use host name for port name and set to use the
host name of the standard TCP/IP port. (A USB connection cannot be
used.)
5
Select the package to be installed.
Packages include the following software:
• Driver Package
KX DRIVER, Status Monitor, Fonts
6
Click Install.
Note
To install Status Monitor, it is necessary to install
Microsoft .NET Framework 4.0 beforehand.
Note
The machine cannot be detected unless it is on. If the
computer fails to detect the machine, verify that it is
connected to the computer via a network or USB cable and
that it is turned on and click (Reload).
To Next Page
Loading...
Need help?
General