8-16
Default Setting (System Menu)
Paper Weight
The machine is capable of printing under the optimum setting for the type of paper being used. A different paper type
setting can be made for each paper source including the MP tray. Not only can preset paper types be selected, but it
is also possible for you to define and select customized paper types. Paper type can be changed using the printer
driver and the operation panel. The following types of paper can be used.
IMPORTANT: If selecting the paper weight, print quality may be poor because of improper fixing of toner.
For Custom 1-8, settings for duplex printing and media type name can be changed.
Use the procedure below to set the paper weight.
Paper Type
Paper source
Paper Weight Displayed in
Operation Panel
Duplex path
MP tray
Paper
Cassette
Plain Yes Yes Normal2 Yes
Transparency Yes No Extra Heavy No
Preprinted Yes Yes Normal2 Yes
Labels Yes No Heavy1 No
Bond Yes Yes Normal3 Yes
Recycled Yes Yes Normal2 Yes
Vellum Yes No Light No
Rough Yes Yes Normal3 Yes
Letterhead Yes Yes Normal3 Yes
Color Yes Yes Normal3 Yes
Prepunched Yes Yes Normal2 Yes
Envelope Yes No Heavy3 No
Cardstock Yes No Heavy3 No
Thick Yes No Heavy3 No
High quality Yes Yes Normal2 Yes
Custom 1 (to 8)*
* This is a paper type defined and registered by the user. Up to eight types of user settings may
be defined. User can also enable or disable the duplex path when using Custom.
Yes Yes Normal2 Yes
Yes: Can be stored No: Cannot be stored
Item Description
Duplex Prohibit Duplex printing not allowed.
Permit Duplex printing allowed.
Name Change names for Custom 1-8. Names
should be not more than 16 characters.
Selecting media type at multi purpose tray,
the name after change will be displayed.
To Next Page
Loading...
Need help?
General
