Kyocera ECOSYS FS-3140MFP User Manual

8
8-75
Default Setting (System Menu)
Use the procedure below to select the emulation.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [Emulation Set.].
4 Press the OK key. Emulation Set. appears.
5 Press the U or V key to select the printer you want to
emulate.
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
NOTE: If you select [KPDL] or [KPDL(Auto)], the operation
after selecting the emulation is different from others.
If you select [KPDL], refer to page 8-76.
If you select [KPDL(Auto)], refer to page 8-76.
Sys. Menu/Count.: a b
5 Common Settings
6 CoPy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Emulation Set.: a b
5 PCL6
6 KPDL
*********************
7 *KPDL(Auto)

Kyocera ECOSYS FS-3140MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-3140MFP
Category	Printer
Language	English