Kyocera ECOSYS FS-3140MFP User Manual

8-78
Default Setting (System Menu)
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Override A4/LTR
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table below
shows the available settings.
Use the procedure below to specify the override A4/Letter setting. The default setting is On.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [Override A4/LTR].
4 Press the OK key. Override A4/LTR appears.
5 Press the U or V key to select [Off] or [On].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Item Description
On A4 and Letter are regarded as the same in
size. The machine will use whichever size
is in the paper source.
Off A4 and Letter are not regarded as the
same in size.
Sys. Menu/Count.: a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Override A4/LTR: a b
1 Off
*********************
2 *On

Kyocera ECOSYS FS-3140MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-3140MFP
Category	Printer
Language	English