Kyocera ECOSYS FS-3140MFP User Manual

8-116
Default Setting (System Menu)
Adding a Destination on One-touch Key
This machine has 11 one-touch keys and you can register 2 destinations to each of them.
The one-touch keys are arranged as shown below:
NOTE: Refer to One-Touch Key on page 3-3 for how to use them.
Registering new destination
Use the procedure below to register a new destination under a One-touch key.
1 In the Send or FAX screen, press the one-touch key to
which you want to register the destination and hold it (2
seconds or longer). Select Key Set. appears.
The screen shown is the one when No.1/No.12 is
pressed and held.
2 Press the U or V key to select the key number to which
you want to register the destination.
3 Press the OK key. The Address Book list screen
appears.
4 Press the U or V key to select the destination you want
to register.
NOTE: If you want to search from the Address Book, refer
to Search in Address Book on page 3-27.
5 Press the OK key. The selected destination is registered
to the one-touch key. Registered. is displayed and the
screen returns to the basic screen.
No.1 No.2 No.3 No.4
No.12 No.13 No.14 No.15
No.5 No6 No.7 No.8
No.16 No.17 No.18 No.19
No.9 No.10 No.11
SHIFT
No.20 No.21 No.22
Select Key No.: a b
*********************
2 No. 12
[ Exit ]
1 No. 1
Addressbook: a b
*********************
l Fiala
l Maury
[ Menu ]
k Design

Kyocera ECOSYS FS-3140MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-3140MFP
Category	Printer
Language	English