Kyocera ECOSYS FS-3140MFP User Manual

8
8-145
Default Setting (System Menu)
4 Press the OK key. The Network Setting menu appears.
5 Press the U or V key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the U or V key to select [LDAP Security].
8 Press the OK key. LDAP Security appears.
9 Press the U or V key to select [Off], [SSL/TLS] or
[STARTTLS].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
SMTP Security
Select the communication protocol according to the type of security employed by the SMTP server. The default setting
is Off.
NOTE: SMTP (E-mail TX) must be set to On in Protocol Detail on page 8-136.
The table below shows the available settings.
Network Setting: a b
5 WSD-PRINT
6 IPSec
*********************
[ Exit ]
7 Secure Protocol
Secure Protocol: a b
2 IPP Security
3 HTTP Security
*********************
[ Exit ]
4 LDAP Security
LDAP Security: a b
*********************
2 SSL/TLS
3 STARTTLS
1 *Off
Item Description
Off Do not use security employed by the SMTP server.
SSL/TLS Encryption is applied any data communication. Encryption is
applied any data communication. To enable SMTP security, the
SMTP port may have to be changed according to the server
settings. Typically, 465* for SSL/TLS is well-known SMTP port.
* You can change the port number using COMMAND CENTER.
STARTTLS Encryption is applied any data communication. Typically, 25* or
587* for STARTTLS is well-known SMTP port.

Kyocera ECOSYS FS-3140MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-3140MFP
Category	Printer
Language	English