10-16
Troubleshooting
2 Lift the developer unit together with the toner container
out of the machine.
3 Open the feed cover.
4 Remove the paper from the machine
If the jammed paper appears to be pinched by rollers,
pull it along the normal running direction of the paper.
NOTE: If you cannot find a paper jam, try checking inside
the rear of the printer. Refer to Rear Unit on page 5-18.
5 Insert the developer unit together with the toner
container, back into the machine.
6 Close the top cover and front cover. The machine warms
up and resumes printing.
To Next Page
Loading...
