Kyocera ECOSYS FS-3140MFP - Page 407

11
11-27
Management
6 Press the U or V key to select [Default Setting].
7 Press the OK key. The Default Setting menu appears.
8 Press the U or V key to select [Apply Limit].
9 Press the OK key. Apply Limit appears.
10 Press the U or V key to select [Immediately],
[Subsequently] or [Alert Only].
11 Press the OK key.
Completed. is displayed and the screen returns to the
Default Setting menu.
Default Setting: a b
*********************
2 Copy/Print Count
3 Counter Limit
[ Exit ]
1 Apply Limit
Apply Limit: a b
1 Immediately
*********************
3 Alert Only
2 *Subsequently