2
Preparation before Use
2-25
4 Click T next to the Model field and select this machine from the list.
5 Click User Authentication Settings. If user login administration is invalid, go to Step 7.
6 Select the checkbox beside Authentication, enter Login User Name (up to 64 characters) and Password (up to
64 characters) and then click OK.
7 Click OK.
8 The machine is registered to the PC and the machine name and model name are displayed in the Scanner List
field.
NOTE: Click Delete to delete the added machine. Click Edit to change names and other settings.
To Next Page
Loading...
Need help?
General