Kyocera ECOSYS FS-C5400DN User Manual

Using the Operation Panel 4-47
Setting a Custom Paper Size
In the procedure below, select the units to be used for entering the custom
paper size and then enter the paper width and length. As shown in the
figure, enter the Y and X values for the paper size, using the selected
units.
1 In the Cassette # Set menu, press U or V to select Custom
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
2 Press [OK]. The Custom PaperSize menu screen appears.
3 Press U or V to select Measurement.
4 Press [OK]. The Measurement menu screen appears.
5 Press U or V to select the paper size units and then press [OK]. The
unit for entering the paper size is set and the Custom PaperSize
menu screen reappears.
6 Press U or V to select Size Entry(Y).
7 Press [OK]. The Size Entry(Y) menu screen appears.
X Dimension
Y Dimension
105 to 216 mm
(4-1/8 to 8-1/2 inches)
148 to 356 mm
(5-13/16 to 14 inches)
Cassette 1 Set.: a b
1 Media Type
2 Other Paper Size
3 Custom PaperSize
[ Exit ]
Custom PaperSize: a b
1 Measurement
2 Size Entry(Y)
3 Size Entry(X)
[ Exit ]
Measurement: a b
1 *inch
2 mm
Size Entry(Y): a b
(5.83 - 14.02)
/*7.00- "
M

Kyocera ECOSYS FS-C5400DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C5400DN
Category	Printer
Language	English