Kyocera ECOSYS FS-C5400DN User Manual

A-6
Expansion Memory Modules
The printer's main controller board has a memory slot into which you can
plug in optional memory modules (dual in line memory modules). You can
increase the printer's memory up to 1280 MB by plugging in the optional
memory modules.
Expansion Memory Modules
You can select additional memory modules from 128, 256, 512 or
1024 MB. The maximum memory size is 1024 MB.
Precautions for Handling the Printer's Main Controller Board
and Memory Modules
To protect electronic parts, discharge static electricity from your body by
touching a water pipe (faucet) or other large metal object before handling
the memory modules. Or, wear an antistatic wrist strap, if possible, when
you install the memory modules.
Always hold the main controller board or a memory module by its edges
as shown below to avoid damaging electronic parts.
Note A 256 MB memory module is already installed at the
factory. To expand memory up to 1280 MB, install 1024 MB
memory module.
YES
NO

Kyocera ECOSYS FS-C5400DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C5400DN
Category	Printer
Language	English