xv
Energy Saving Control Function
To reduce energy consumption while in a waiting state, the device comes
equipped with an energy saving control function for switching to a Sleep
Mode where power consumption is automatically reduced to a minimum
after a certain amount of time elapses since the device was last used.
Sleep
The device automatically enters Sleep when 45 minutes have passed
since the device was last used. The amount of time of no activity that must
pass before Sleep is activated may be lengthened. For more information,
refer to Sleep Timer (Sleep timer timeout setting) section.
Automatic 2-Sided Print Function
This device includes 2-sided printing as a standard function. For example,
by printing two 1-sided originals onto a single sheet of paper as a 2-sided
print, it is possible to lower the amount of paper used. For more
information, refer to Duplex (Duplex Printing) section.
Paper Recycling
This device supports the recycled paper which reduces the load on the
environment. Your sales or service representative can provide
information about recommended paper types.
Energy Star (ENERGY STAR
®
) Program
We have determined as a participating company in the International
Energy Star Program that this product is compliant with the standards laid
out in the International Energy Star Program.
To Next Page
Loading...
Need help?
General