4-78 Using the Operation Panel
Format Mem. Card (Formatting the memory card)
The printer is equipped with a slot for a memory card.
For details about the handling of the memory card, refer to Formatting the
Memory Card on page A-9.
A new memory card must be formatted before it can be used in the printer.
Formatting allows data to be written to the memory card.
IMPORTANT Format Mem. Card is only displayed when a memory
card is installed in the printer and protection is disabled.
When a new memory card is inserted in the printer's slot, Format Mem.
Card will appear on the message display.
1 In the Device Common menu, press U or V to select Format Mem.
Card.
2 Press [OK]. A confirmation screen appears.
3 Press [Yes] ([Left Select]). The Formatting memory card...
screen appears and memory card formatting begins. Once the
formatting ends, the standby screen reappears.
Pressing [No] ([Right Select]) returns you to the Device Common
menu without formatting the memory card.
Display Bright. (Display brightness setting)
Sets the brightness of the message display.
1 In the Device Common menu, press U or V to select Display
Bright..
2 Press [OK]. The Display Bright. screen appears showing the
available brightness settings.
The list shows the following brightness settings:
Darker -2
Darker -1
Normal 0
Lighter +1
Lighter +2
3 Press U or V to select the desired brightness.
4 Press [OK]. The brightness is set and the Device Common menu
reappears.
Note Formatting will destroy any existing data on a storage
device including a used memory card.
Formatting of the memory card must be executed from the printer.
To Next Page
Loading...
Need help?
General