Kyocera ECOSYS FS-C5400DN User Manual

4-82 Using the Operation Panel
1 In the Timer Setting menu, press U or V to select Sleep Timer.
2 Press [OK]. The Sleep Timer screen appears.
3 Use the arrow keys to set the sleep time.
Press U or V to increase or decrease, respectively, the value at the
blinking cursor.
Use Y and Z to move the cursor right and left.
4 Press [OK]. The sleep time setting is stored and the Timer Setting
menu reappears.
PanelReset Timer (Setting the panel reset timer)
When Auto Panel Reset is set to On, this sets the time until the panel
is automatically reset after the user stops using the panel.
The default setting is 90 seconds.
1 In the Timer Setting menu, press U or V to select PanelReset
Timer.
2 Press [OK]. The PanelReset Timer screen appears.
3 Use the arrow keys to set the panel reset time.
Press U or V to increase or decrease, respectively, the value at the
blinking cursor.
Use Y and Z to move the cursor right and left.
4 Press [OK]. The panel reset time setting is stored and the Timer
Setting menu reappears.
FormFeed TimeOut (Automatic form feed timeout setting)
If the printer receives no data for a set period, it times out and releases
the current interface. It then prints whatever data it has in its buffer and
feeds out the printed page.
The default setting is 30 seconds.
1 In the Timer Setting menu, press U or V to select FormFeed
TimeOut.
2 Press [OK]. The FormFeed TimeOut screen appears.
Sleep Timer: a b
(1 - 240)
/45- min.
M
PanelReset Timer: a b
(5 - 495)
/90- sec.
M
FormFeed TimeOut: a b
(5 - 495)
/30- sec.
M

Kyocera ECOSYS FS-C5400DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C5400DN
Category	Printer
Language	English