Kyocera ECOSYS M2540dw User Manual

5-4
Operation on the Machine > Loading Originals
2
Place the originals.
1 Put the side to be scanned (or the first side of two-sided originals) face-up. Slide the
leading edge into the document processor as far as it will go.
2 Open the original stopper to fit the size of the original set (Original size: Folio/Legal).
NOTE
For details on Original Orientation, refer to the following:
Original Orientation (page 6-16)
IMPORTANT
Confirm that the original width guides exactly fit the originals. If there is a gap,
readjust the original width guides. The gap may cause the originals to jam.
Ensure that loaded originals do not exceed the level indicator. Exceeding the
maximum level may cause the originals to jam.
Originals with punched holes or perforated lines should be placed in such a way
that the holes or perforations will be scanned last (not first).

Kyocera ECOSYS M2540dw Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Fax Capability	Yes
Standard Paper Capacity	250 sheets
Max Paper Capacity	850 sheets
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Processor	800 MHz
Dimensions	417 x 412 x 437 mm
Weight	19 kg
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm
Scan Type	Color
Copy Speed	Up to 40 cpm (A4)
Connectivity	USB 2.0, Ethernet, Wi-Fi
First Print Out Time	6.4 seconds
First Copy Out Time	6.4 seconds
Scan Speed	40 ipm
Paper Input Capacity	250 sheets
Paper Output Capacity	150 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Interface	USB 2.0, Ethernet, Wi-Fi
Mobile Printing	Apple AirPrint, KYOCERA Mobile Print