EasyManuals Logo

Kyocera ECOSYS M2540dw User Manual

Kyocera ECOSYS M2540dw
410 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
2-20
Installing and Setting up the Machine > Network Setup
Configuring the Wireless Network
Setting the Connection by Using the Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or handheld device
with the machine locally. The connection methods are wired connection via LAN cable and wireless LAN connection (Wi-
Fi Direct).
Wired Connection by Using LAN Cable
1
Connect the machine with a computer
1 Connect the machine with a computer via LAN cable when the machine is powered on.
2 Turn on the computer.
IP address (link local address) of the machine and computer is generated automatically.
When the wireless network function is available on the machine and the connection settings are configured, it is possible
to print or send in a wireless network (wireless LAN) environment. The configuration methods are as follows:
Configuration Method Description Reference Page
Configuring the Connection
from the Operation Panel
on This Machine
Use Wi-Fi Settings or Wireless Network to configure
the network in details from System menu.
Wi-Fi Settings (page 8-8)
Setting the Connection by
Using the Wi-Fi Setup Tool
This is the tool included in the Product Library. You
can configure the connection according to the
instructions provided by the wizard.
Setting the Connection by
Using the Wi-Fi Setup Tool
(page 2-20)
Configuring Connections
on the Web Page
The connection can be set from the Command
Center RX.
Command Center RX User
Guide
NOTE
On a model with a Wi-Fi function, change the settings in "Primary Network" appropriately if you switch to other than a
wired network interface.
Primary Network (page 8-16)
NOTE
• Before using the Wi-Fi Setup Tool, connect your computer to this machine locally with wired LAN cable or Wi-Fi
Direct.
• To use Wi-Fi Direct, confirm that the Wi-Fi Direct is enabled (Wi-Fi Direct is set to [On]) and Restart Network from
the operation panel, before your computer will be connected to this machine with Wi-Fi Direct.
• To use a wired LAN cable directly connected to the machine, the Auto-IP (Link-local) address will be assigned to the
machine and the computer. This machine applies Auto-IP as the default settings.
• Configure the settings on the operation panel if your computer supports WPS.
Wi-Fi Settings (page 8-8)

Table of Contents

Other manuals for Kyocera ECOSYS M2540dw

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M2540dw and is the answer not in the manual?

Kyocera ECOSYS M2540dw Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Fax CapabilityYes
Standard Paper Capacity250 sheets
Max Paper Capacity850 sheets
FunctionsPrint, Copy, Scan, Fax
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Processor800 MHz
Dimensions417 x 412 x 437 mm
Weight19 kg
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed40 ppm
Scan TypeColor
Copy SpeedUp to 40 cpm (A4)
ConnectivityUSB 2.0, Ethernet, Wi-Fi
First Print Out Time6.4 seconds
First Copy Out Time6.4 seconds
Scan Speed40 ipm
Paper Input Capacity250 sheets
Paper Output Capacity150 sheets
Supported Paper SizesA4, A5, A6, B5, Letter, Legal
InterfaceUSB 2.0, Ethernet, Wi-Fi
Mobile PrintingApple AirPrint, KYOCERA Mobile Print

Related product manuals