EasyManuals Logo

Kyocera ECOSYS M2540dw User Manual

Kyocera ECOSYS M2540dw
410 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
2-19
Installing and Setting up the Machine > Network Setup
3 Set the IP address.
4 Select the [OK] key.
5 [ā–²] [] key > [Subnet Mask] > [OK] key
6 Set the subnet mask.
7 Select the [OK] key.
8 [ā–²] [] key > [Default Gateway] > [OK] key
9 Set the default gateway.
10Select the [OK] key.
11[ā–²] [] key > [Auto-IP] > [OK] key
12[Off] > [OK] key
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [ā–²] or [ā–¼] key to enter a number.
Select the [ā—„] or [ā–ŗ] key to move the position being entered, which is shown highlighted.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [ā–²] or [ā–¼] key to enter a number.
Select the [ā—„] or [ā–ŗ] key to move the position being entered, which is shown highlighted.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [ā–²] or [ā–¼] key to enter a number.
Select the [ā—„] or [ā–ŗ] key to move the position being entered, which is shown highlighted.
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Network (page 8-16)
NOTE
Ask your network administrator for the IP address in advance, and have it ready when you
configure this setting.
In the following cases, set the IP address of DNS server on the Command Center RX.
• When using the host name with "DHCP" setting set to "Off"
• When using the DNS server with IP address that is not assigned by DHCP automatically.
Setting the IP Address of the DNS Server, refer to the following:
Command Center RX User Guide

Table of Contents

Other manuals for Kyocera ECOSYS M2540dw

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M2540dw and is the answer not in the manual?

Kyocera ECOSYS M2540dw Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Fax CapabilityYes
Standard Paper Capacity250 sheets
Max Paper Capacity850 sheets
FunctionsPrint, Copy, Scan, Fax
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Processor800 MHz
Dimensions417 x 412 x 437 mm
Weight19 kg
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed40 ppm
Scan TypeColor
Copy SpeedUp to 40 cpm (A4)
ConnectivityUSB 2.0, Ethernet, Wi-Fi
First Print Out Time6.4 seconds
First Copy Out Time6.4 seconds
Scan Speed40 ipm
Paper Input Capacity250 sheets
Paper Output Capacity150 sheets
Supported Paper SizesA4, A5, A6, B5, Letter, Legal
InterfaceUSB 2.0, Ethernet, Wi-Fi
Mobile PrintingApple AirPrint, KYOCERA Mobile Print

Related product manuals