Kyocera ECOSYS M2540dw User Manual

10-16
Troubleshooting > Troubleshooting
Black points appear in white
background parts of the
image.
Is the original holder or the glass platen
dirty?
Clean the original holder or the glass
platen.
page 10-2
― Select the [System Menu/Counter] key
> [Adjust/Maint.] > [Service Setting] >
[Drum Refresh], and then select [Yes].
―
― Select the [System Menu/Counter] key
> [Adjust/Maint.] > [Service Setting] >
[MC] and increase the adjustment value.
Increase the adjustment value 1 level at
a time from the current value. If there is
no improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
―
Printed images are fuzzy. Is the machine being used in conditions
of very humid, or humidity or
temperature rapidly changes?
Use in an environment that has suitable
humidity.
―
― Select the [System Menu/Counter] key
> [Adjust/Maint.] > [Service Setting] >
[Drum Refresh], and then select [Yes].
―
Printed images are skewed. Are the originals placed correctly? When placing originals on the platen, align
them with the original size indicator plates.
page 5-2
When placing originals in the document
processor, align the original width guides
securely before placing the originals.
page 5-3
Is the paper loaded correctly? Check the position of the paper width
guides.
page 3-2
Irregular horizontal lines
appear in the image.
― Select the [System Menu/Counter] key
> [Adjustment/Maintenance] >
[Service Setting] > [MC] and increase
the adjustment value. Increase the
adjustment value 1 level at a time from
the current value. If there is no
improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
―
The altitude is 1000 m or
higher and irregular
horizontal white lines appear
in the image.
― Select the [System Menu/Counter] key
> [Adjustment/Maintenance] >
[Service Setting] > [Altitude
Adjustment], and set to an elevation
one level higher than the current setting.
―
Symptom Checkpoints Corrective Actions
Reference
Page

Kyocera ECOSYS M2540dw Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Fax Capability	Yes
Standard Paper Capacity	250 sheets
Max Paper Capacity	850 sheets
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Processor	800 MHz
Dimensions	417 x 412 x 437 mm
Weight	19 kg
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm
Scan Type	Color
Copy Speed	Up to 40 cpm (A4)
Connectivity	USB 2.0, Ethernet, Wi-Fi
First Print Out Time	6.4 seconds
First Copy Out Time	6.4 seconds
Scan Speed	40 ipm
Paper Input Capacity	250 sheets
Paper Output Capacity	150 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Interface	USB 2.0, Ethernet, Wi-Fi
Mobile Printing	Apple AirPrint, KYOCERA Mobile Print