5-4
Operation on the Machine > Connecting cable
When you place envelopes or cardstock on the platen
1 Put the
scanning side
facedown.
2 Align it flush
against the
original size
indicator plates
with the back
left corner as
the reference
point.
• For the procedure for feeding envelopes or cardstock, refer to the following:
When you place envelopes or cardstock on the platen (5-9)
Do not leave the document processor open as there is a danger of personal injury.
• Do not push the document processor forcefully when you close it. Excessive pressure may crack the
platen glass.
• When placing books or magazines on the machine, do so with the document processor in the open
position.
To Next Page
Loading...
