Kyocera ECOSYS M4132idn

9-22
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Settings
The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
Enabling Simple Login
Select whether or not simple login is enabled.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [User Login Settings] > [Simple Login Settings] > [Simple Login]
2
Configure the settings.
Select [Off] or [On].
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu / Counter]key > [User Login/Job Accounting]
NOTE
• For user registration, refer to the following:
Adding a User (Local User List) (9-6)
• To use Simple Login, User Login Administration must be enabled in "User Login Settings".
Enabling User Login Administration (9-4)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200