Kyocera ECOSYS M4132idn

8-16
System Menu > [Common Settings]
[Function Defaults]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Function Defaults]
Item Description
File Format Set the default type of the files.
Value: PDF, High Comp. PDF, TIFF, JPEG, XPS, OpenXPS
Original Orientation (Copy) Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left
Original Orientation (Send/
Store)
Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left
Collate/Offset Set the defaults for Collate/Offset.
Value
Off, Collate Only, Offset Each Page, Offset Each Set
File Separation Select the default file separation setting.
Value: Off, Each Page
Scan Resolution Select the default scanning resolution.
Value: 600x600dpi, 400x400dpi Ultra, 300x300dpi, 200x400dpi Super, 200x200dpi Fine,
200x100dpi Normal
Color Selection Set the default color mode setting.
Value: Auto (Color/Gray), Auto (Color/B & W), Full Color, Grayscale, Black & White
Original Image(Copy) Set the default original document type for copying.
Value: Text+Photo, Photo, Text, Graphic/Map
Original Image(Send/Store) Set the default original document type for sending/storing.
Value: Text+Photo, Photo, Text, Text (for OCR), Light Text/Fine Line
Background Density Adj.
(Copy)
Set the default Backgrnd Density (Copy).
Value: Off, Auto, Manual (Darker 5)
Background Density Adj.
(Send/Store)
Set the default Backgrnd Density (Send/Store).
Value: Off, Auto, Manual (Darker 5)
EcoPrint Select the EcoPrint default.
Value: Off, On
Prevent Bleed-through (Copy) Set the default value for preventing bleed-through (Copy).
Value: Off, On
Prevent Bleed-through (Send/
Store)
Set the default Prevent Bleed (Send/Store).
Value: Off, On
Skip Blank Page (Copy) Select the default Skip Blank Page settings.
Value: Off, On
Skip Blank Page (Send/Store) Select the default Skip Blank Page settings (Copy).
Value: Off, On
FAX TX Resolution
*1
FAX Operation Guide
Zoom Set the zoom defaults.
Value: 100%, Auto