9-4
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
Enable User accounting. Select the following authentication methods.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [User Login Setting] > [User Login]
2
Configure the settings.
1 Select [Local Authentication] or [Network Authentication].
Select [Off] to disable user login administration.
If you select [Network Authentication], Select [NTLM], [Kerberos] or [Ext.] as the server type. Also, enter the host name (64
characters or less) and domain name (256 characters or less) for the Authentication Server.
When selecting [Ext.] as the server type, enter the port number.
2 "Do you want to add a new function to the home screen?" screen appears. To display a new function on the
Home screen, select [Yes] and specify the position in which you want to display the icon of registered function.
Editing the Home Screen (3-8)
Item Description
Local Authentication User authentication based on user properties on the local user list stored in the machine.
Network Authentication User authentication based on Authentication Server. Use a user property stored in
Authentication Server to access the network authentication login page.
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Selecting [Domain Name] displays the domain registration list. Enter the domain name.
Up to 10 domain names can be registered.
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any administrator registered in the local
user list and correct the settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
