5-3
Operation on the Machine > Connecting cable
Connecting cable
Load the originals on the platen or document processor, depending on the original size, type, volume, and function.
• Platen: Place the sheet, book, postcards, and envelopes.
• Document Processor: Place the multiple originals. You can also place the two sided originals.
Placing Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
1 Put the scanning side facedown.
2 Align it flush against the original size
indicator plates with the back left corner as
the reference point.
• A5 is detected as A4-R. Set the paper size to A5 by using the function key on the touch panel.
[Original Size] (6-4)
• For details on Original Orientation, refer to the following:
[Original Orientation] (6-9)
To Next Page
Loading...
