Kyocera ECOSYS M4132idn

8-19
System Menu > [Common Settings]
[Error Handling]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Error Handling]
Select whether to cancel or continue the job when error has occurred.
[Measurement]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Measurement]
Item Description
Duplexing Error Set what to do when duplex printing is not possible for the selected paper sizes and
media types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Finishing Error Set alternative actions when finishing (Staple/Offset) is not available for the selected
paper size or media type.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
No Staple Error Set what to do when staples run out during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional Document Finisher.
Stapling Limit Error Set what to do when stapling capacity is exceeded during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional Document Finisher.
Paper Mismatch Error Set what to do when the selected paper size or type does not match paper size or type
loaded in the specified paper source while printing from the computer by specifying the
cassette or multi-purpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Inserted Paper Mismatch Set what to do when it is detected that the cassette paper size setting does not match
the actual paper size that is fed.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Item Description
Measurement Select inch or metric for the unit for paper dimensions.
Value: mm, inch