6-11
Advanced Function Settings > [Collate/Offset]
Offset
Without Document Finisher (Option)
When offset is used, the paper of each set (or each page) is rotated 90 degrees when output.
Without Document Finisher (Option)
When offset is used, the paper of each set (or each page) is offset when output.
When offset is used without a Document Finisher, an additional paper feed unit is required. The paper size of
the additional paper feed unit must be the same as that of the selected paper feed unit, but the paper orientation
must be different.
The paper sizes supported in Offset: A4, B5, Letter, 16K
Item Description
Off Sort and offset are not performed.
Collate Only Collate Only
Offset Each Page Each page is offset.
Offset Each Set Offset Each Set
To Next Page
Loading...
