8-6
System Menu > [Report]
[Admin Report Settings]
Menu Transition: [System Menu / Counter] key > [Report] > [Admin Report Settings]
This specifies whether an Outgoing FAX Report or Incoming FAX Report should be printed automatically.
FAX Operation Guide
[Result Report Setting]
Menu Transition: [System Menu / Counter] key > [Report] > [Result Report Setting]
*1 Displayed only when the optional fax function is installed.
*2 This does not appear when both [E-mail/Folder] and [FAX] are set to [Off].
Sub Address Box List This prints a report for fax functions.
FAX Operation Guide
This function is displayed only on products with the optional fax function installed.
FAX List (Index)
FAX List (No.)
Outgoing FAX Report
Incoming FAX Report
Optional Network Status Prints the optional network status, allowing you to check the information including
optional network interface firmware version, network address and protocol.
This function appears when the optional Network Interface Kit or Wireless Interface kit is
installed.
Item Description
Send Result Report Automatically print a report of transmission result when a transmission is complete.
E-mail/Folder Automatically print a report of transmission result when E-mail or SMB/FTP transmission is
complete.
Value: Off, On, Error Only
FAX
*1
FAX Operation Guide
Attach Image of
Network FAX
Select the attached image form Body and Cover Page when sending the Network FAX.
Value: Body Text, Cover Page
Canceled before
Sending
*2
Print a send result report if the job is canceled before being sent.
Value: Off, On
Recipient
Format
*2
Select the Recipient Format for the send result report.
Value: Name or Destination, Name and Destination
RX Result Report
*1
FAX Operation Guide
Job Finish Notice
Setting
*1
FAX Operation Guide
Item Description
To Next Page
Loading...
