Kyocera ECOSYS M4132idn - Page 339

8-21
System Menu > [Common Settings]
[Display Status/Log]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Display Status/Log]
Set the display method of the Status/Log.
*1 Displayed only when the optional fax function is installed.
[Function Key Assignment]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Function Key Assignment]
Assign a function to a function key.
*1 Displayed when an external server (fax server) is configured.
Displayed only on products with the optional fax function installed.
*3 Display only when an optional SSD is installed.
*4 The running application will be displayed.
[Show Power Off Massage]
Menu Transition: [System Menu / Counter] key > [Common Settings] > [Show Power Off Message]
Item Description
Display Jobs Detail Status Value: Show All, My Jobs Only, Hide All
Display Jobs Log Value: Show All, My Jobs Only, Hide All
Display FAX Log
*1
Value: Show All, Hide All
Item Description
Function Key 1 Value: None, Copy, Send, FAX Server
*1
, FAX
*2
, Custom Box
*3
, Job Box, Removable
Memory, Sub Address Box
*2
, Polling Box
*2
, FAX Memory RX Box
*2
, ID Card Copy,
Paper Saving Copy, Scan to PC (Address Entry), Scan to PC (Address Book), Scan to
E-mail (Address Entry), Scan to E-mail (Address Book), Application
*4
NOTE
You can select any function displayed in [All], [Application], [Favorites], [Others] options
by pressing [Menu] > [Narrow Down] or using the pull-down menu.
Function Key 2
Function Key 3
Item Description
Show Power Off Message Set the mode whether display a confirmation message in power supply off.
Value: Off, On