Kyocera ECOSYS M4132idn - Page 352

8-34
System Menu > [System/Network]
Network Name (SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
NOTE
Up to 32 characters can be entered.
Network Authentication Select network authentication type.
Value: Open System, WPA2/WPA-PSK, WPA2-PSK, WPA2/WPA-EAP, WPA2-EAP
Encryption Select encryption method. The setting values vary depending on the [Network
Authentication] setting.
When [Network Authentication] is set to [Open]
Value: Disable, WEP
WEP Key: Up to 26 characters
WEP Key Index: 0 to 3
When Network Authentication is set to [WPA2/WPA-PSK]
Value: AES, Auto
Pre-shared Key: Up to 64 characters
When Network Authentication is set to [WPA2-PSK]
Value: AES (Fixed)
Pre-shared Key: Up to 64 characters
When Network Authentication is set to [WPA2/WPA-EAP]
Value: AES, Auto
When Network Authentication is set to [WPA2-EAP]
Value: AES (Fixed)
Item Description