Kyocera ECOSYS M4132idn - Page 444

11-10
Troubleshooting > Responding to Messages
B
C
Symptom Checkpoints Corrective Actions Reference
Page
Box is not found. - The specified box cannot be found.
Job is canceled. Select [End].
-
Box limit exceeded. Is [End] displayed on the screen? The specified box is full, and no
further storage is available; Job is
canceled. Select [End]. Try to
perform the job again after printing
or deleting data from the box.
-
Symptom Checkpoints Corrective Actions Reference
Page
Cassette is not
installed.
- Cannot feed paper. Set the
cassette indicated on the screen.
-
Cannot connect to
Authentication
Server.
- Set machine time to match the
server’s time.
2-12
- Check the domain name. 9-4
- Check the host name. 9-4
- Check the connection status with
the server.
-
Cannot connect. - This appears when the Wi-Fi or Wi-
Fi Direct connection did not
complete. Check the settings, and
check the signal conditions.
-
Cannot duplex print
on the following
paper.
Did you select a paper size/type that
cannot be duplex printed?
Select [Paper Selection] to select
the available paper. Select
[Continue] to print without using
Duplex function.
6-29
Cannot offset the
following paper.
Did you select a paper size/type that
cannot be offset?
Select [Paper Selection] to select
the available paper. Select
[Continue] to print without using
Offset function.
6-10